FS170 Saw - Inductotherm Group China
×

FS170 Saw

For fast single-blade friction cuts up to 6.625 inch (168 mm) diameter, the FS170 friction saw performs. This flying saw tracks tube and pipe speed during production and, using a 100 HP accelerator motor and high-performance low-backlash rack and pinion, cuts precisely at line speeds up to 320 feet per minute (100 mpm) with a single 35 inch (900 mm) diameter blade. The cost-effective FS170 with its variable speed blade drive, is the perfect saw for heavy wall applications where production speed is critical. The FS170 is easy to setup and maintain and utilizes simple low-cost tooling for quick blade change.

 

REQUEST A QUOTE »

Inductotherm Industries (Shanghai) Ltd

应达工业(上海)有限公司上海浦东新区张江高科技园区郭守敬路50号

  • Phone: 86-21 3895 3220
  • Fax: 86-21-3895 3230

Email: sales@inductotherm.com.cn

Features

  • Excellent cut length control ±0.125 inch in 20 ft (3 mm in 6 m)
  • Programmable for round, square and rectangle profiles
  • Controllable cutting speed for various tube sizes
  • Display of cumulative cross-sectional area of metal removed during cutting
  • Dynamic home saw positioning to maximize production capability
  • Full system diagnostics
  • Batch length setup for up to ten products
  • Cut length display for each cut
  • Simple low-cost tooling
  • Easy to maintain

Tech Specs

The following chart shows achievable mill speeds for 0.100in (2.5mm) wall product. Additional cutting specifications available upon request.

20ft (6m) Tube 40ft (12m)
 Outer Diameter Speed Speed
2.375in (60.3mm) 230ft/min (70mpm) 320ft/min (97.5mpm)
3.5in (89mm) 200ft/min (60.9mpm) 290ft/min (88mpm)
4.5in (114m) 190ft/min (57.9mpm) 280ft/min (85mpm)
6.625in (168mm) 160ft/min (48.7mpm) 250ft/min (76mpm)